AudioCodes MediaPack MP-114 User Manual Download Page 45

Page: 45 / 164

User's Manual

6. Configuration Using the Web Interface

Version 6.6

MediaPack Series

6.2

Accessing the Web Interface



To access the Web interface:

Open any standard Web-browser application, such as Microsoft™ Internet Explorer™
(Ver. 6.0 and higher) or Firefox™ (Versions 5 through 9.0).

Note:

The browser must be Java-script enabled. If java-script is disabled, a message

box with notification of this is displayed.

Specify the IP address of the device in the browser's URL field (e.g., http://10.1.229.17
or https://10.1.229.17 for an SSL secure link). The browser's Password page appears.

The default user-name and password are both "Admin" (case-sensitive).

Figure 6: Enter Network Password Screen

Summary of Contents for MediaPack MP-114





































































































































































Search results

Summary of Contents for MediaPack MP-114

Reviews:

Related manuals for MediaPack MP-114

Brands by name

Popular brands

AudioCodes MediaPack MP-114, User Manual

Search results

Summary of Contents for MediaPack MP-114

Reviews:

Related manuals for MediaPack MP-114

Brands by name

Popular brands