AudioCodes MediaPack MP-114, User Manual

Page: 17 / 164

User's Manual 3. Getting Started
Version 6.6 17 MediaPack Series
3.3 Assigning an IP Address Using BootP
Notes:
•
The BootP procedure should be performed using any standard
compatible BootP server.
•
For Mediant 3000 HA, in order to get the BootP reset request from the
blade, perform a double reset on the system, as described in Private IP
Address and System (Global) IP Address.
Tip: You can also use BootP to load the auxiliary files to the device (refer to
'Using BootP/DHCP' on page 29).

To assign an IP address using BootP:
1. Obtain and install a BootP server application on your PC.
2. Add the client configuration for the device.
3. Reset the gateway physically causing it to use BootP. The device changes its network
parameters to the values provided by BootP.