AudioCodes MediaPack MP-114, User Manual

Page: 143 / 164

User's Manual 6. Configuration Using the Web Interface
Version 6.6 143 MediaPack Series
6.7.2 VoIP Status
6.7.2.1 Active IP Interfaces

To display the IP Interface Status page:
1. Open the IP Interface Status page ( Status & Diagnostics tab > VoIP Status menu >
IP Interface Status ).
2. This page details the currently Active network interfaces, when working in Multiple
Interface mode.
Figure 104: IP Interface Status
Note: For a full description of the table fields, refer to the Network Configuration
chapter in the Product Reference Manual.
Please note the following:

Every entry represents an interface index.

The IP Interface Status page is relevant only when the Multiple Interfaces Table is
configured.

On IPv6 interfaces, the link-local address is displayed below the global address. It is
prefixed by ‘*’ to indicate that it is a link-local address. Additionally, there is a textual
note at the bottom of the page explaining the meaning of the "*". The zone index is
appended to the link-local address using the ‘%’ as delimiter (e.g. fe80::1%2).