AudioCodes MediaPack MP-114, User Manual

Page: 123 / 164

User's Manual 6. Configuration Using the Web Interface
Version 6.6 123 MediaPack Series
6.6.1.1.1 Resetting the Device
The 'Maintenance Actions' page allows you to remotely reset the device. In addition, before
resetting the device, you can choose the following options:

Save the device's current configuration to the device's flash memory (non-volatile).

Perform a graceful shutdown, i.e., device reset starts only after a user-defined time
expires (i.e., timeout) or after no more active traffic exists (the earliest thereof).

To reset the device:
1. Open the 'Maintenance Actions' page (refer to Maintenance Actions on page 122).
2. Under the 'Reset Configuration' group, from the 'Burn To FLASH' drop-down list,
select one of the following options:
•
'Yes': The device's current configuration is saved (burned) to the flash memory
prior to reset (default).
•
'No': Resets the device without saving the current configuration to flash (discards
all unsaved modifications).
3. Under the 'Reset Configuration' group, from the 'Graceful Option' drop-down list,
select one of the following options:
•
'Yes': Reset starts only after the user-defined time in the 'Shutdown Timeout' field
(refer to Step 4) expires or after no more active traffic exists (the earliest thereof).
In addition, no new traffic is accepted.
•
'No': Reset starts regardless of traffic, and any existing traffic is terminated at
once.
4. In the 'Shutdown Timeout' field (relevant only if the 'Graceful Option' in the previous
step is set to 'Yes'), enter the time after which the device resets. Note that if no traffic
exists and the time has not yet expired, the device resets.
5. Click Reset; a confirmation message box appears, requesting you to confirm.
Figure 82: Reset Confirmation Message Box
6. Click OK to confirm device reset; if the parameter 'Graceful Option' is set to 'Yes' (in
Step 3), the reset is delayed and a page displaying the number of remaining calls and
time is displayed. When the device begins to reset, a message appears notifying you
of this.
Notes:
•
Throughout the Web interface, parameters preceded by the lightning
symbol are not applied on-the-fly to the device and require that you reset
the device for them to take effect.
•
If you modify parameters that only take effect after a device reset, after you
click Submit, the toolbar displays the word 'Reset' (refer to Toolbar) to
remind you to later reset the device.