AudioCodes MediaPack MP-114, User Manual

Page: 116 / 164

User's Manual 116 Document #: LTRT-71405
MediaPack Series
The device can be configured to report voice (media) quality of experience to AudioCodes
Session Experience Manager (SEM) server, a plug-in for AudioCodes EMS. The reports
include real-time metrics of the quality of the actual call experience and processed by the
SEM.
Notes:
•
To support this feature, the device must be installed with the relevant
Software License Key.
•
To configure the parameters to report and their thresholds per Media
Realm, see Configuring QoE per Media Realm on page 108.
•
For information on the SEM server, refer to the EMS User's Manual.
6.5.2.9 Call Control
Call Control menu options are described below.
6.5.2.9.1 Protocol Selection

To select the Control Protocol Type:
1. Open the Control Protocol Selection page ( Configuration tab > VoIP menu > Call
Control > Protocol Selection ).
Figure 73: Protocol Selection
2. Click the radio button of the required protocol.
Note: Changing the protocol type requires a device reset. When you have
completed configuring the required parameters, the device must be reset using the
Reset screen for the changes to be implemented.