AudioCodes Mediant 500 MSBR, User Manual

Page: 79 / 1248

Version 7.2 79 Mediant 500 MSBR
User's Manual 7. Web-Based Management
7.7 Changing Login Password for Administrator and
Monitor Users
If you are logged in as a user with Administrator level or Monitor level, you can change
your login password by performing the following procedure.
Note:
•
Users with Security Administrator level or Master level can change passwords for
themselves and for other users in the Local Users table (see Configuring
Management User Accounts on page 71).
•
You can only change the password if the duration configured in the 'Password
Change Interval' has elapsed (see Configuring Web Session and Access Settings
on page 77).

To change the login password:
1. Open the Web Settings page ( Setup menu > Administration tab > Web & CLI folder
> Web Settings ).
Figure 7-34: Changing Login Password for Administrator and Monitor User Levels
2. In the 'Current Password' field, type in your current login password.
3. In the 'New Password' field, type in your new password.
4. In the 'Confirm New Password' field, type in your new password again.
5. Click Change ; you are logged off the Web session and prompted to login in again with
your new login password.
7.8 Configuring Secured (HTTPS) Web
By default, the device allows remote management (client) through HTTP and HTTPS.
However, you can enforce secure Web access communication by configuring the device to
accept only HTTPS.

To configure secure (HTTPS) Web access:
1. Open the Web Settings page ( Setup menu > Administration tab > Web & CLI folder
> Web Settings ).
2. Under the General group, configure the following:
3. From the 'Secured Web Connection (HTTPS)' drop-down list, select HTTPS Only .
4. To enable two-way authentication whereby both management client and server are
authenticated using X.509 certificates, from the 'Require Client Certificates for HTTPS
connection' drop-down list, select
Enable .
5. In the 'HTTPS Cipher String' field, enter the cipher string for HTTPS (in OpenSSL