AudioCodes Mediant 500 MSBR, User Manual, Page: 59 / 1248

Version 7.2 59 Mediant 500 MSBR
User's Manual 7. Web-Based Management
You may want to access the referenced-table (e.g., Proxy Sets table) to simply view all its
configured rows and their settings, without selecting one. To do this, click the
View button.
To return to the dialog box of the table (e.g., IP Groups table) in which you are making your
configuration, click the arrow icon on the minimized dialog box to restore it to its
previous size.
7.1.6.3 Modifying Table Rows
The following procedure describes how to modify (edit) the configuration of an existing
table row. Remember that a gray-colored dot icon displayed next to a parameter's value
(as shown in the example below), indicates that it was changed from its default value:

To edit a table row:
1. Select the row that you want to edit.
2. Click the Edit button, located on the table's toolbar; a dialog appears
displaying the current configuration settings of the row.
3. Make your changes as desired, and then click Apply ; the dialog box closes and your
new settings are applied.
4. If the Save
button is surrounded by a red border, you must save your
settings to flash memory, otherwise they are discarded if the device resets (without a
save to flash) or powers off.
7.1.6.4 Deleting Table Rows
The following procedure describes how to delete a row from a table.

To delete a table row:
1. Select the row that you want to delete.
2. Click the delete icon, located on the table's toolbar; a confirmation message box
appears requesting you to confirm deletion, as shown in the example below:
3. Click Yes, Delete ; the row is removed from the table and the total number of
configured rows that is displayed next to the page title and page item in the Navigation
tree is updated to reflect the deletion.
Note: If the deleted row (e.g., a Proxy Set) was referenced in another table (e.g., IP
Group), the reference is removed and replaced with an empty field. In addition, if the
reference in the other table is for a mandatory parameter, the invalid icon is
displayed where relevant. For example, if you delete a SIP Interface that you have
assigned to a Proxy Set, the invalid icon appears alongside the
Proxy Sets item in
the Navigation tree as well as on the Proxy Sets page.