AudioCodes Mediant 500 E-SBC, User Manual

Page: 487 / 920

User's Manual 28. SBC Configuration
Version 6.8 487 Mediant 500 E-SBC

To configure a Message Condition rule:
1. Open the Message Condition Table page ( Configuration tab > VoIP menu > SBC >
Routing SBC > Message Condition Table ).
2. Click Add ; the following dialog box appears:
Figure 28-7: Condition Table Page - Add Record Dialog Box
3. Configure a Message Condition rule according to the parameters described in the
table below.
4. Click Submit , and then save ("burn") your settings to flash memory.
An example of configured Message Condition rules is shown in the figure below:
Figure 28-8: Condition Table Page

Index 0: Incoming SIP dialog that is classified as belonging to a User-type IP Group.

Index 1: Incoming SIP dialog that contains a SIP Via header.

Index 2: Incoming SIP dialog with 101 as the user part in the SIP From header.
Table 28-5: Message Condition Table Parameter Descriptions
Parameter Description
Index
[ConditionTable_Index]
Defines an index number for the new table record.
Condition
CLI: condition
[ConditionTable_Condition]
Defines the Condition rule of the SIP message.
The valid value is a string.
Note: User and host parts must be enclosed in single quotes.
Description
CLI: description
[ConditionTable_Description]
Defines a brief description of the Condition rule.