AudioCodes Mediant 4000 SBC, User Manual

Page: 601 / 1037

CHAPTER 25 Routing SBC
Mediant 4000 SBC | User's Manual
2. Click New ; the following dialog box appears:
3. Configure a SIP response code for alternative routing according to the parameters described in
the table below.
4. Click Apply .
Table 25-3: Alternative Routing Reasons Table Parameter Descriptions
Parameter Description
'Index'
[SBCAlternativeRoutingReasons_
Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
'Name'
alt-res-name
[SBCAlternativeRoutingReasons_
AltReasonName]
Defines an arbitrary name to easily identify the row.
The valid value is a string of up to 20 characters.
Note: Each row must be configured with a unique name.
'Release Cause'
rel-cause
[SBCAlternativeRoutingReasons_
ReleaseCause]
Defines a SIP response code that triggers the device's
alternative routing mechanism.
[4] 4xx ; [5] 5xx ; [6] 6xx ; [400] Bad Request ; [402] 402
Payment Required ; [403] Forbidden ; [404] Not
Found ; [405] Method Not Allowed ; [406] Not
Acceptable ; [408] Request Timeout (Default); [409]
Conflict ; [410] Gone ; [413] Request Too Large ; [414]
Request URI Too Long ; [415] Unsupported Media ;
[420] Bad Extension ; [421] Extension Required ; [423]
Session Interval Too Small ; [480] Unavailable ; [481]
Transaction Not Exist ; [482] Loop Detected ; [483]
Too Many Hops ; [484] Address Incomplete ; [485]
Ambiguous ; [486] Busy ; [487] Request Terminated ;
[488] Not Acceptable Here ; [491] Request Pending ;
[493] Undecipherable ; [500] Internal Error ; [501] Not
Implemented ; [502] Bad Gateway ; [503] Service
Unavailable ; [504] Server Timeout ; [505] Version Not
Supported ; [513] Message Too Large ; [600] Busy
Everywhere ; [603] Decline ; [604] Does Not Exist
Anywhere ; [606] Not Acceptable ; [805] Admission
Failure ; [806] Media Limits Exceeded ; [818]
Signalling Limits Exceeded .
Configuring SBC Routing Policy Rules
The Routing Policies table lets you configure up to 250 Routing Policy rules. A Routing Policy
determines the routing and manipulation (inbound and outbound) rules per SRD in a multiple SRD
configuration topology. The Routing Policy also configures the following:
- 568 -