AudioCodes Mediant 3000, User Manual

Page: 95 / 872

Version 6.6 95 Mediant 3000
User's Manual 6. SNMP-Based Management
6.4 Configuring SNMP V3 Users
The SNMP v3 Users page allows you to configure authentication and privacy for up to 10
SNMP v3 users.

To configure SNMP v3 users:
1. Open the SNMP v3 Users page ( Configuration tab > System menu > Management
submenu > SNMP submenu > SNMP V3 Users ).
2. Click Add ; the following dialog box appears:
Figure 6-3: SNMP V3 Setting Page - Add Record Dialog Box
3. Configure the SNMP V3 Setting parameters according to the table below.
4. Click Submit to apply your settings.
5. To save the changes, see 'Saving Configuration' on page 520 .
Notes:
•
If you delete a user that is associated with a trap destination (in
'Configuring SNMP Trap Destinations' on page
92 ), the configured trap
destination becomes disabled and the trap user reverts to default (i.e.,
SNMPv2).
•
The SNMP v3 Users table can also be configured using the table ini file
parameter, SNMPUsers (see 'SNMP Parameters' on page
657 ).
SNMP V3 Users Parameters
Parameter Description
Index
[SNMPUsers_Index]
The table index.
The valid range is 0 to 9.
User Name
[SNMPUsers_Username]
Name of the SNMP v3 user. This name must be unique.
Authentication Protocol
[SNMPUsers_AuthProtoc
ol]
Authentication protocol of the SNMP v3 user.

[0] None (default)

[1] MD5

[2] SHA-1