AudioCodes Mediant 3000, User Manual

Page: 865 / 872

Version 6.6 865 Mediant 3000
User's Manual 55. Selected Technical Specifications
55 Selected Technical Specifications
The section lists the technical specifications of the Mediant 3000.
Note: All specifications in this document are subject to change without prior notice.
Technical Specifications
Function Specification
Trunk & Channel Capacity
PSTN-IP Calls 2,016 simultaneous voice, fax, and data channels
IP-to-IP RTP
Forwarding

Max RTP packet payload size: 1,000 bytes

Max RTP payload bit rate on a single session: 384 kbps

Average RTP payload bit rate on full capacity: 200 kbps
SBC Sessions

RTP-RTP: 1,008

SRTP-RTP: 1,008
IP-to-IP Transcoding
Sessions 1,008
Registered Users
(SBC, SAS) 3,000 (5,000 Depopulated)
Interfaces
Ethernet Ethernet interface depends on the blade that is housed in the device's
chassis:

6310 Blade: Dual (1+1 redundancy) Gigabit Ethernet (GbE) ports,
full-duplex mode with auto-negotiation. These ports are available
(by customer order) in one of the following hardware configurations:

10/100/1000Base-TX RJ-45 connector interface (CAT-5 twisted-
pair copper cabling)

1000Base-SX 1.25 Gbps multi-mode optical small form-factor
pluggable (SFP) transceiver, using 850 nm wavelength (hot-
swappable)

8410 Blade:

Four 10/100Base-TX RJ-45 Ethernet port interfaces (CAT-5
twisted-pair copper cabling) for Physical Network Separation
(used by the active blade in HA mode).

Dual (1+1 redundancy) Gigabit Ethernet (GbE) Ethernet ports,
full-duplex mode with auto-negotiation per blade. These ports
are available (by customer order) in one of the following
hardware configurations:
1) 10/100/1000Base-TX RJ-45 connector interface (CAT-5
twisted-pair copper cabling)
2) 1000Base-SX multi-mode optical small form-factor pluggable
(SFP) transceiver, using 850 nm wavelength
E1/T1 Up to 63 E1 and 84 T1 interfaces.
Note: Applicable only to Mediant 3000 with TP-8410 blade.