AudioCodes Mediant 3000, User Manual

Page: 832 / 872

User's Manual 832 Document #: LTRT-89729
Mediant 3000
Parameter Description
[ RoutingRuleGroups ]
FORMAT RoutingRuleGroups_Index =
RoutingRuleGroups_LCREnable,
RoutingRuleGroups_LCRAverageCallLength,
RoutingRuleGroups_LCRDefaultCost;
[ \ RoutingRuleGroups ]
Note: For a detailed description of this table, see 'Enabling LCR and
Configuring Default LCR' on page 217 .
Web: Cost Group Table
EMS: Cost Group
Provisioning > Cost Group
[CostGroupTable]
This table parameter configures the Cost Groups for LCR, where
each Cost Group is configured with a name, fixed call connection
charge, and a call rate (charge per minute).
[ CostGroupTable ]
FORMAT CostGroupTable_Index =
CostGroupTable_CostGroupName,
CostGroupTable_DefaultConnectionCost,
CostGroupTable_DefaultMinuteCost;
[ \ CostGroupTable ]
For example: CostGroupTable 2 = "Local Calls", 2, 1;
Note: For a detailed description of this table, see 'Configuring Cost
Groups' on page 219 .
Web: Cost Group > Time
Band Table
EMS: Time Band
Provisioning > Time Band
[CostGroupTimebands]
This table parameter configures time bands and associates them
with Cost Groups.
[CostGroupTimebands]
FORMAT CostGroupTimebands_TimebandIndex =
CostGroupTimebands_StartTime, CostGroupTimebands_EndTime,
CostGroupTimebands_ConnectionCost,
CostGroupTimebands_MinuteCost;
[\CostGroupTimebands ]
Note: For a detailed description of this table, see 'Configuring Time
Bands for Cost Groups' on page 220 .
53.13 LDAP Parameters
The Lightweight Directory Access Protocol (LDAP) parameters are described in the table
below. For more information on routing based on LDAP, see 'Routing Based on LDAP
Active Directory Queries' on page
205 .
LDAP Parameters
Parameter Description
Web: LDAP Service
[LDAPServiceEnable]
Enables the LDAP feature.

[0] Disable (default)

[1] Enable
Note: For this parameter to take effect, a device reset is required.
Web: LDAP Server IP
EMS: Server Ip
[LDAPServerIP]
Defines the LDAP server's address as an IP address (in dotted-
decimal notation, e.g., 192.10.1.255).
The default is 0.0.0.0.
Web: LDAP Server Port
EMS: Server Port
[LDAPServerPort]
Defines the LDAP server's port number.
The valid value range is 0 to 65535. The default port number is 389.