AudioCodes Mediant 3000, User Manual

Page: 78 / 872

User's Manual 78 Document #: LTRT-89729
Mediant 3000
4.7 Configuring Web and Telnet Access List
The Web & Telnet Access List page is used to define IP addresses (up to ten) that are
permitted to access the device's Web, Telnet, and SSH interfaces. Access from an
undefined IP address is denied. If no IP addresses are defined, this security feature is
inactive and the device can be accessed from any IP address. The Web and Telnet Access
List can also be defined using the
ini file parameter WebAccessList_x (see 'Web and
Telnet Parameters' on page 653 ).

To add authorized IP addresses for Web, Telnet, and SSH interfaces access:
1. Open the Web & Telnet Access List page ( Configuration tab > System menu >
Management submenu > Web & Telnet Access List ).
Figure 4-30: Web & Telnet Access List Page - Add New Entry
2. To add an authorized IP address, in the 'Add an authorized IP address' field, enter the
required IP address, and then click
Add New Entry ; the IP address you entered is
added as a new entry to the Web & Telnet Access List table.
Figure 4-31: Web & Telnet Access List Table
3. To delete authorized IP addresses, select the Delete Row check boxes corresponding
to the IP addresses that you want to delete, and then click
Delete Selected
Addresses ; the IP addresses are removed from the table and these IP addresses can
no longer access the Web and Telnet interfaces.
4. To save the changes to flash memory, see 'Saving Configuration' on page 520 .
Notes:
•
The first authorized IP address in the list must be your PC's (terminal) IP
address; otherwise, access from your PC is denied.
•
Delete your PC's IP address last from the 'Web & Telnet Access List
page. If it is deleted before the last, subsequent access to the device
from your PC is denied.