AudioCodes Mediant 2000, User Manual

Page: 60 / 418

SIP User's Manual 60 Document #: LTRT-68808
Mediant 2000
Parameter Description
must be deactivated, otherwise, the device receives a response
from the BootP server instead of from the DHCP server.
ƒ
For additional information on DHCP, refer to the
Product
Reference Manual
.
ƒ
DHCPEnable is a special 'Hidden' parameter. Once defined and
saved in flash memory, its assigned value doesn't revert to its
default even if the parameter doesn't appear in the
ini
file.
3.4.1.4 Configuring the NFS Settings
Network File System (NFS) enables the device to access a remote server's shared files and
directories, and to handle them as if they're located locally. You can configure up to five
different NFS file systems. As a file system, the NFS is independent of machine types, OSs,
and network architectures. NFS is used by the device to load the
cmp
,
ini
, and auxiliary
files, using the Automatic Update mechanism (refer to Automatic Update Mechanism). Note
that an NFS file server can share multiple file systems. There must be a separate row for
each remote file system shared by the NFS file server that needs to be accessed by the
device.
¾
To add remote NFS file systems, take these 6 steps:
1.
Open the 'Application Settings' page (refer to ''Configuring the Application Settings'' on
page
57 ).
2.
Under the NFS Settings group, click the right-arrow button alongside
NFS Table
;
the 'NFS Settings' page appears.
Figure 3-37: NFS Settings Page
3.
In the 'Add' field, enter the index number of the remote NFS file system, and then click
Add
; an empty entry row appears in the table.
4.
Configure the NFS parameters according to the table below.
5.
Click the
Apply
button; the remote NFS file system is immediately applied, which can
be verified by the appearance of the 'NFS mount was successful' message in the
Syslog server.
6.
To save the changes to flash memory, refer to ''Saving Configuration'' on page 230 .