AudioCodes Mediant 2000, User Manual

Page: 44 / 418

SIP User's Manual 44 Document #: LTRT-68808
Mediant 2000
3.3.6.2 Customizing the Product Name
You can customize the product name (text) that appears in the Title bar, using the
ini
file
parameters listed in the table below. (For a description on using the
ini
file, refer to
''Modifying an ini File'' on page 259 .)
Table 3-4: ini File Parameters for Customizing Product Name
Parameter Description
UseProductName
Defines whether or not to change the product name:
ƒ
[0]
= Don’t change the product name (default).
ƒ
[1]
= Enable product name change.
UserProductName
The text string that replaces the product name.
The default is ‘Mediant 2000’.
The string can be up to 29 characters.
3.3.6.3 Creating a Login Welcome Message
You can create a Welcome message box (alert message) that appears after each successful login to
the device's Web interface. The
ini
file table parameter WelcomeMessage allows you to create the
Welcome message. Up to 20 lines of character strings can be defined for the message. If this
parameter is not configured, no Welcome message box is displayed after login.
An example of a Welcome message is shown in the figure below:
Figure 3-24: User-Defined Web Welcome Message after Login
Table 3-5: ini File Parameter for Welcome Login Message
Parameter Description
WelcomeMessage
Defines the Welcome message that appears after a successful login to the
Web interface. The format of this parameter is as follows:
[WelcomeMessage]
FORMAT WelcomeMessage_Index = WelcomeMessage_Text;
[\WelcomeMessage]
For Example:
[WelcomeMessage ]
FORMAT WelcomeMessage_Index = WelcomeMessage_Text;
WelcomeMessage 1 = "*********************************";
WelcomeMessage 2 = "********* This is a Welcome message **";
WelcomeMessage 3 = "*********************************";
[\WelcomeMessage]
Note:
Each index represents a line of text in the Welcome message box.
Up to 20 indices can be defined.