AudioCodes Mediant 2000, User Manual

Page: 40 / 418

SIP User's Manual 40 Document #: LTRT-68808
Mediant 2000
3.3.5.6 Deleting a Scenario
You can delete the Scenario by using the
Delete Scenario File
button, as described in the
procedure below:
¾
To delete the Scenario, take these 4 steps:
1.
On the Navigation bar, click the
Scenarios
tab; a message box appears, requesting
you to confirm:
Figure 3-19: Scenario Loading Message Box
2.
Click
OK
; the Scenario mode appears in the Navigation tree.
3.
Click the
Delete Scenario File
button; a message box appears requesting
confirmation for deletion.
Figure 3-20: Message Box for Confirming Scenario Deletion
4.
Click
OK
; the Scenario is deleted and the Scenario mode closes.
Note:
You can also delete a Scenario using the following alternative methods:
•
Loading an empty
dat
file (refer to ''Loading a Scenario to the Device'' on
page 39 ).
•
Loading an
ini
file with the ScenarioFileName parameter set to no value
(i.e., ScenarioFileName = "").