AudioCodes Mediant 2000, User Manual

Page: 36 / 418

SIP User's Manual 36 Document #: LTRT-68808
Mediant 2000
3.3.5.2 Accessing a Scenario
Once you have created the Scenario, you can access it at anytime by following the
procedure below:
¾
To access the Scenario, take these 2 steps:
1.
On the Navigation bar, select the
Scenario
tab; a message box appears, requesting
you to confirm the loading of the Scenario.
Figure 3-16: Scenario Loading Message Box
2.
Click
OK
; the Scenario and its Steps appear in the Navigation tree, as shown in the
example figure below:
Figure 3-17: Scenario Example
When you select a Scenario Step, the corresponding page is displayed in the Work pane. In
each page, the available parameters are indicated by a dark-blue background; the
unavailable parameters are indicated by a gray or light-blue background.
To navigate between Scenario Steps, you can perform one of the following:
„ In the Navigation tree, click the required Scenario Step.