AudioCodes Mediant 2000, User Manual

Page: 29 / 418

Version 5.6 29 November 2008
SIP User's Manual 3. Web-Based Management
Figure 3-9: Editing Symbol after Modifying Parameter Value
¾
To save configuration changes on a page to the device's volatile
memory (RAM), take this step:
„ Click the
Submit
button, which is located near the bottom of the page in which
you are working; modifications to parameters with on-the-fly capabilities are
immediately applied to the device and take effect; other parameters (displayed on the
page with the lightning
symbol) are not changeable on-the-fly and require a device
reset (refer to ''Resetting the Device'' on page 228 ) before taking effect.
Notes:
•
Parameters saved to the volatile memory (by clicking
Submit
), revert to
their previous settings after a hardware or software reset (or if the device
is powered down). Therefore, to ensure parameter changes (whether on-
the-fly or not) are retained, you need to save ('burn') them to the device's
non-volatile memory, i.e., flash (refer to ''Saving Configuration'' on page
230 ).
•
If you modify a parameter value and then attempt to navigate away from
the page without clicking
Submit
, a message box appears notifying you
of this. Click
Yes
to save your modifications or
No
to ignore them.