AudioCodes Mediant 2000, User Manual

Page: 240 / 418

SIP User's Manual 240 Document #: LTRT-68808
Mediant 2000
9.
In the 'FINISH' page, complete the upgrade process by clicking
Reset;
the device
'burns' the newly loaded files to flash memory and then resets t.he device. After the
device resets, the 'End Process' screen appears displaying the burned configuration
files (refer to the figure below).
Figure 3-106: End Process Wizard Page
10.
Click
End Process
to close the wizard, and then in the 'Enter Network Password'
dialog box, enter your login user name and password (described in ''Accessing the
Web Interface'' on page
20 ) and click
OK
; a message box appears informing you of
the new CMP file:
Figure 3-107: Message Box Informing of Upgraded CMP File
11.
Click
OK
; the Web interface now becomes active and reflecting the upgraded device.
3.5.2.4 Backing Up and Restoring Configuration
The 'Configuration File' page allows you to save a copy of the device's current configuration
file modifications as an
ini
file to a PC. This is useful for backing up your configuration to
protect your device configuration. The saved
ini
file includes only those parameters that
were modified as well as parameters with other than default values.
In addition, this page allows you to load an
ini
file to the device. If the device has lost its
configuration, you can restore the device's configuration by loading the previously saved
ini
file, or by simply loading a newly created
ini
file.