manualshive.com logo in svg

AudioCodes Mediant 2000, User Manual

The AudioCodes Mediant 2000 is a versatile communication device, designed to enhance your business phone systems. With its comprehensive User Manual, easily downloadable for free at our manualshive.com, you can effortlessly navigate through its features, configurations, and troubleshooting information. Perfect for optimizing your communication network and boosting productivity.

Share
Download
background image

Version 5.6 

107 

November 2008 

SIP User's Manual 

 

3. Web-Based Management 

 

7. 

In the 'Certificates Files' group, click the 

Browse 

button corresponding to 'Send Server 

Certificate...', navigate to the cert.txt file, and then click 

Send File

. 

8. 

When the loading of the certificate is complete, save the configuration (refer to ''Saving 
Configuration'' on page 

230

) and restart the device; the Web interface uses the 

provided certificate. 

 

 

Notes:  

•

 

The certificate replacement process can be repeated when necessary 
(e.g., the new certificate expires). 

•

 

It is possible to use the IP address of the device (e.g., 10.3.3.1) instead of 
a qualified DNS name in the Subject Name. This is not recommended 
since the IP address is subject to changes and may not uniquely identify 
the device. 

•

 

The server certificate can also be loaded via 

ini

 file using the parameter 

HTTPSCertFileName. 

 

¾

 

To apply the loaded certificate for IPsec negotiations, take these 2 
steps: 

1. 

Open the ‘IKE Table’ page (refer to ''Configuring the IKE Table'' on page 

117

); the 

'Loaded Certificates Files' group lists the newly uploaded certificates, as shown below: 

Figure 

 

3-55: IKE Table Listing Loaded Certificate Files 

 

2. 

Click the 

Apply 

button to load the certificates; future IKE negotiations are now 

performed using the new certificates. 

 

Summary of Contents for Mediant 2000



































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Mediant 2000

Yacht Devices YDOG-01 User Manual preview
YDOG-01
Brand: Yacht Devices Pages: 32
Infranet Technologies M2M CONTROL C660 Technical Manual preview
M2M CONTROL C660
Brand: Infranet Technologies Pages: 36
Gree ME30-24/E6 Service Manual preview
ME30-24/E6
Brand: Gree Pages: 21
ABB TG/S 3.1 Product Manual preview
TG/S 3.1
Brand: ABB Pages: 45
ABB RER601 Technical Manual preview
RER601
Brand: ABB Pages: 108
SSS Siedle SET CLVSG 850-1 Product Information preview
SET CLVSG 850-1
Brand: SSS Siedle Pages: 32
Zoom IG-4160 User Manual preview
IG-4160
Brand: Zoom Pages: 48
Zoom 4150 Installation Reference Manual preview
4150
Brand: Zoom Pages: 72
Gigaset SE567 Quick Start Manual preview
SE567
Brand: Gigaset Pages: 8
Capetti Elettronica Wine Cap MWDG-ETH Configuration Manual preview
Wine Cap MWDG-ETH
Brand: Capetti Elettronica Pages: 6
Technicolor MediaAccess TG799vn Setup And User Manual preview
MediaAccess TG799vn
Brand: Technicolor Pages: 128
IBM Security Web Gateway Appliance Quick Start Manual preview
Security Web Gateway Appliance
Brand: IBM Pages: 2
Agilent Technologies 829-0027 User Manual preview
829-0027
Brand: Agilent Technologies Pages: 58
RCA SpeedTouch 985 Specification Sheet preview
SpeedTouch 985
Brand: RCA Pages: 4
Juniper SRX320 Hardware Manual preview
SRX320
Brand: Juniper Pages: 154
Juniper SRX100B Hardware Manual preview
SRX100B
Brand: Juniper Pages: 172
Juniper SRX-4600 Hardware Manual preview
SRX-4600
Brand: Juniper Pages: 210
Gaoke BG9000 User Manual preview
BG9000
Brand: Gaoke Pages: 24

Brands by name

Popular brands

Load more brands