Installation & Maintenance Manual
216
Document #: LTRT-40111
Mediant 1000B SBA
29.10 Defining the MAC Address Prefix
You can configure the MAC address (prefix or full address) of the Mediant 1000B for which
the SBA upgrade and recovery process can run, using the MacPrefix parameter. This
prevents accidental running of the SBA upgrade and recovery on your PC. If not
configured, the procedure runs on any system.
[User Confirm] MacPrefix=00-45-B1-22-49-B1
You can define several MAC addresses by suffixing the MacPrefix parameter with an index
number for each MAC address, as shown in the example below:
[User Confirm]
MacPrefix=01034E
MacPrefix1=0
MacPrefix7=01-03-5C
MacPrefix3=01-03
The default MAC addresses set in the file include the following:
MacPrefix=00-80-82
MacPrefix1=00-40-9E
MacPrefix2=00-0B-AB
Summary of Contents for Mediant 1000B SBA
