AudioCodes Mediant 1000 Installation And Configuration Manual Download Page 41

Page: 41 / 168

Installation and Configuration Manual

3. Initialization

SBA for Microsoft Lync

December 2010

Select one of the patterns listed in the table below (

aa.bb.cc.dd

denotes the IP address

of the configuration server):

Configuration File Name Pattern

Description

1 http://aa.bb.cc.dd/config.ini

Standard

config.ini.

2 https://aa.bb.cc.dd/config.ini

Secure

HTTP.

3 http://aa.bb.cc.dd/audiocodes/<MAC>.ini

The device's MAC address is appended to the file
name (e.g.,
http://36.44.0.6/audiocodes/00908f012300.ini).

http://aa.bb.cc.dd:8080/config.ini

HTTP on port 8080.

http://aa.bb.cc.dd:1400/config.ini

HTTP on port 1400.

http://aa.bb.cc.dd/cgi-
bin/acconfig.cgi?mac=<MAC>&ip=<IP>

Generating configuration per IP/MAC address
dynamically, using a CGI script. See perl example
below.

Press the selected pattern code, and then press

to finish.

Press

to save, and then hang up the handset. The device retrieves the configuration from

the HTTP server.

The following is an example perl CGI script, suitable for most Apache-based HTTP servers for
generating configuration dynamically per pattern #6 above. Copy this script to /var/www/cgi-
bin/acconfig.cgi on your Apache server and edit it as required:

#!/usr/bin/perl
use CGI;
$query = new CGI;
$mac = $query->param('mac');
$ip = $query->param('ip');

print "Content-type: text/plain\n\n";
print "; INI file generator CGI\n";
print "; Request for MAC=$mac IP=$ip\n\n";
print <<"EOF";

SyslogServerIP = 36.44.0.15
EnableSyslog = 1
SSHServerEnable = 1

EOF

The table below lists the configuration parameters that can be queried or modified using the voice
menu:

Table

3-2: Configuration Parameters Available via the Voice Menu

Item Number at

Menu Prompt

Description

IP address.

Subnet mask.

Default Gateway IP address.

Primary DNS server IP address.

DHCP enable / disable.

Configuration server IP address.

Configuration file name pattern.

Voice menu password (initially 12345).

Note:

The voice menu password can also be changed using the Web interface or

ini

file parameter VoiceMenuPassword (refer to the

User's Manual

Summary of Contents for Mediant 1000









































































































































































Search results

Summary of Contents for Mediant 1000

Reviews:

Related manuals for Mediant 1000

Brands by name

Popular brands

AudioCodes Mediant 1000, Installation And Configuration Manual

Search results

Summary of Contents for Mediant 1000

Reviews:

Related manuals for Mediant 1000

Brands by name

Popular brands