AudioCodes Media Pack MP-11x, User Manual

Page: 98 / 650

User's Manual 98 Document #: LTRT-65432
MP-11x & MP-124
8.2 Loading an ini File
You can load an ini file to the device using the following methods:

Web interface, using any of the following pages:
•
Configuration File - see 'Backing Up and Loading Configuration File' on page 388
•
Load Auxiliary Files - see 'Loading Auxiliary Files' on page 369

AudioCodes AcBootP utility, which uses Bootstrap Protocol (BootP) and acts as a
TFTP server. For information on using the AcBootP utility, refer to AcBootP Utility
User's Guide.

Any standard TFTP server. This is done by storing the ini file on a TFTP server and
then having the device download the file from it.
When loaded to the device, the configuration settings of the ini file are saved to the
device's non-volatile memory. If a parameter is not included in the loaded ini file, the
following occurs:

Using the Load Auxiliary Files page: Current settings for parameters that were not
included in the loaded ini file are retained.

All other methods: The default is assigned to the parameters that were not included in
the loaded ini file and thereby, overriding values previously configured for these
parameters.
Notes:
•
For a list and description of the ini file parameters, see 'Configuration Parameters
Reference' on page 475 .
•
Some parameters are configurable only through the ini file (and not the Web
interface).
•
To restore the device to default settings using the ini file, see 'Restoring Factory
Defaults' on page 389 .