AudioCodes Media Pack MP-11x, User Manual

Page: 84 / 650

User's Manual 84 Document #: LTRT-65432
MP-11x & MP-124
5.5 Ping Command
The Ping command is described in the following table:
Ping Command
Command Short Format Arguments Description
PING ping [-n count]
[-l size]
[-w timeout]
[-p cos]
ip-address
Sends ICMP echo request packets to a
specified IP address.

count: number of packets to send.

size: payload size in each packet.

timeout: time (in seconds) to wait for a reply
to each packet.

cos: Class-of-Service (as per 802.1p) to
use.
Example:
/>ping 10.31.2.10
Ping process started for address 10.31.2.10. Process ID - 27.
Reply from 10.31.2.10: bytes=0 time<0ms
Reply from 10.31.2.10: bytes=0 time<0ms
Reply from 10.31.2.10: bytes=0 time<0ms
Reply from 10.31.2.10: bytes=0 time<0ms
Ping statistics for 10.31.2.10:
Packets:Sent = 4, Received = 4, Lost 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
5.6 Management Commands
The commands under the MGmt directory, described in the table below, display current
performance values.
CLI Management Command
Command Short Format Arguments Description
/MGmt/PERFormance /mg/perf basic | control | dsp |
net | reset Displays performance statistics.
The
reset argument clears all
statistics to zero.