AudioCodes Media Pack MP-11x, User Manual

Page: 642 / 650

User's Manual 642 Document #: LTRT-65432
MP-11x & MP-124
Parameter Description
File
[PrerecordedTonesFileName]
Tones.
Notes:

For this parameter to take effect, a device reset is required.

PRT is not supported by MP-124 Rev. E.
Web: Dial Plan File
EMS: Dial Plan File Name
[DialPlanFileName]
Defines the name (and path) of the Dial Plan file. This file should be
created using AudioCodes DConvert utility (refer to
DConvert Utility
User's Guide ).
[UserInfoFileName] Defines the name (and path) of the file containing the User
Information data.
44.15 Automatic Update Parameters
The automatic update of software and configuration files parameters are described in the
table below.
Table 44-66: Automatic Update of Software and Configuration Files Parameters
Parameter Description
General Automatic Update Parameters
[AutoUpdateCmpFile] Enables the Automatic Update mechanism for the cmp file.

[0] = (Default) The Automatic Update mechanism doesn't apply
to the cmp file.

[1] = The Automatic Update mechanism includes the cmp file.
Note: For this parameter to take effect, a device reset is required.
[AutoUpdateFrequency]
Defines the number of minutes that the device waits between
automatic updates. The default is 0 (i.e., the update at fixed intervals
mechanism is disabled).
Note: For this parameter to take effect, a device reset is required.
[AutoUpdatePredefinedTime] Defines schedules (time of day) for automatic updates. The format
of this parameter is: 'HH:MM', where HH denotes the hour and MM
the minutes, for example, 20:18.
Notes:

For this parameter to take effect, a device reset is required.

The actual update time is randomized by five minutes to reduce
the load on the Web servers.
[AupdHttpUserAgent]
Defines the information sent in the HTTP User-Agent header in the
HTTP Get requests sent by the device to the provisioning server for
the Automatic Update mechanism.
The valid value is a string of up to 511 characters. The information
can include any user-defined string or the following string variable
tags (case-sensitive):

<NAME>: product name, according to the installed Software
License Key

<MAC>: device's MAC address

<VER>: software version currently installed on the device, e.g.,
"7.00.200.001"

<CONF>: configuration version, as configured by the ini file
parameter, INIFileVersion or CLI command, configuration-version