AudioCodes C435HD, User'S And Administrator'S Manual, Page: 93 / 103

CHAPTER 7 Troubleshooting
C435HD Users & Administrator's Manual
➢
To activate DSP recording using SSH protocol without the Teams IP Phone Utility, type
the following at the shell prompt:
setprop ac.dr_voice_enable true
setprop ac.dr_ipaddr <ip_address>
setprop ac.dr_port 50000
DSP recording can be activated on the fly without requiring the network administrator to
reset the phone.
Deactivating DSP Recording
Network administrators can deactivate DSP recording using AudioCodes' SSH protocol based
Teams IP Phone Utility.
➢
To deactivate DSP Recording:
1. In the AudioCodes Teams IP Phone Utility (see Teams IP Phone Utility on page 75 for more
information), click Stop DSP Record after a period of recording (see Activating DSP
Recording on the previous page for information on how to start DSP recording.
2. View in the PC Folder you configured the DSP recording.
Network administrators can alternatively deactivate a DSP recording using SSH pro-
tocol
without the Teams IP Phone Utility, as shown next.
➢
To deactivate DSP recording using SSH protocol without the Teams IP Phone Utility,
type the following at the shell prompt:
setprop ac.dr_voice_enable false
DSP recording can be deactivated on the fly without requiring the network administrator
to reset the phone.
- 88 -