User's Manual
3. Getting Started
Version 3.1.1
21
Huddle Room Solution
3.4
Selecting an Alphanumerical Mode
The keypad lets you enter alphabetical letters, numbers or symbols, and to switch between them.
To select a number, letter or symbol (e.g., lower case letters):
1.
When configuring a contact, for example, touch the
A/a/1
softkey:
Figure 3-4: Alphanumerical Selection
You can also access the mode menu by pressing the
#
key on the keypad. Successively press
the
#
key to navigate in the mode menu.
2.
From the mode menu, navigate to and select:
•
abc
=
lower case letters
•
ABC
=
upper-case letters
•
Abc
=
first-letter upper case, the rest lower case
•
123
=
numerical mode (i.e., numbers)
3.
Select
abc
(for example) and then on the keypad, press
2
(for example);
a
is entered.
Successively press
5
three times;
l
is entered (pressing it once produces
j
, twice produces
k
). Similarly, enter
a
and finally
n
.
To enter a symbol (e.g., dot or @ or hyphen):
1.
Touch the
A/a/1
softkey and navigate to
abc
(mandatory).
2.
Press the
1
key on the keypad; a period / full stop is entered.
Immediately
press the
1
key
again; a backslash is entered.
3.
Pressing successively produces the following symbols:
Symbol Explanation
Symbol Explanation
.
Dot
*
Star sign
\
Backslash
=
Equal sign
@
At
|
Separator
;
Semi-colon
(
Open parenthesis
