Huddle Room Solution
User's Manual
16
Document #: LTRT-12922
Figure 2-6: UC-HRS-458 Speaker in a PoE Environment
•
Plug the power adapter into the electrical wall outlet
•
Connect the splitter cable's straight connector to the speaker (leave one splitter cable
unconnected)
•
Power is supplied to the AC-HRS device via the Ethernet cable
Prior to connecting power, refer to the Compliancy and Regulatory Information at
2.4
Mounting the AC-HRS Device on its Stand
This section shows how to mount the AC-HRS
device
on its stand to better direct the audio.
To mount the AC-HRS device on its stand:
1.
Off-hook the handset (if on-hook) and place the AC-HRS device upside down, i.e., base-up,
on the conference desk.
2.
On the AC-HRS device's stand, identify outer notches.
3.
On the AC-HRS device's base, identify outer rails.
4.
Invert the stand and align its outer notches with the base's outer rails.
5.
Insert the stand's outer notches into the base's outer rails and slide the notches along the
rails until the stand click-locks into the base.
6.
Revert the AC-HRS device and stand it on the conference desk.
2.4.1
Routing the Handset Cable
The AC-HRS device features a groove for routing the handset cable.
2.5
Positioning the HRS on the Conference Desk
UC-HRS-457 is ideal for up to 6 people. Position the speaker/microphone at the center of the
conference desk, up to 2m/6ft from each participant for optimum performance:
