400HD Series IP Phones
Administrator's Manual
90
Document #: LTRT-11973
5.4.5 Configuring the Phone to play Fast Busy Tone if Automatically
Disconnected on Remote Side
Network administrators can configure the phone to play a fast busy tone if it is automatically
disconnected on the remote side. Network administrators can also configure for how long
this fast busy tone is played. When the phone plays the tone, it also displays a 'Disconnected'
message for the same length of time.
To configure this feature:
•
Use the table as reference.
Table 5-23: Configuring the Phone to Play a Fast Busy Tone when Automatically Disconnected
on Remote Side
Parameter
Description
enable_remote_disconnect_warningTone
Allows you to enable or disable playing a
fast busy tone if the phone is automatically
disconnected on the remote side.
0
(default) If the phone accepts an
incoming call and the remote side
automatically ends it (disconnects), the
phone does not play any tone and no
message is displayed.
1
If the phone accepts an incoming call
and the remote side automatically ends
(disconnects) it, the phone plays a fast
busy tone and displays a Disconnected
message (see the parameter
description below).
voip/dialing/automatic_disconnect_delay_timer
Defines for how long the fast busy tone is
played and for how long the 'Disconnected'
message is displayed if the warningTone
parameter above is enabled and the phone
is automatically disconnected on the
remote side. Default: 600 ms.
Summary of Contents for 405HD
Page 2: ......
