400HD Series IP Phones
Administrator's Manual
78
Document #: LTRT-11973
5.3.2 Configuring Auto Redial
Note:
Support pending.
The administrator is responsible for enabling/disabling the auto-redial feature. If enabled
and a called party is unavailable because they're busy (for example), the caller's phone's
SCREEN prompts
Extension Busy. Activate auto redial on busy?
If the caller then activates auto-redial by pressing
Yes
, the busy extension is automatically
redialed every
n
seconds.
The administrator is also responsible for configuring this frequency.
To configure dialing:
•
Use the table as reference.
Table 5-13: Automatic Redial On Busy Parameters
Parameter
Description
voip/dialing/automatic_redial_on_busy/
enabled
Allows the administrator disable/enable the feature.
0
=Disabled
1
=Enabled
Default:
0
voip/dialing/automatic_redial_on_busy/
retry_timer
Visible only if the feature is enabled. Range: 3-120.
Default:
30
. If the feature is activated and the timer
lapses, an outgoing call to the busy destination is
established. If the feature is activated, a countdown
screen is displayed:
Dialing <ext> within <x>s (Line
<n>)
The screen shows the timer, the remote extension
and the line number.
Summary of Contents for 405HD
Page 2: ......
