AudioCodes 405HD, Administrator'S Manual, Page: 45 / 242

Administrator's Manual 3. Configuring Automatic Provisioning
Version 3.4.3 45 400HD Series IP Phones
For security, communication between the phone and the HTTPS Redirect server is encrypted
(HTTPS) and uses the pre-installed AudioCodes factory-set certificate to authenticate itself
with the HTTPS Redirect server and to verify authenticity of the latter. If the redirect URL
(where the configuration file is stored) also uses the HTTPS protocol, the phone can use a
regular certificate or the AudioCodes factory-set certificate to authenticate itself and to
validate the server’s certificate if a trusted root certificate (regular) is configured.
Note: The phone repeats the redirect process whenever it undergoes a reset to factory
defaults.
3.1.3 Static URL Provisioning
The network administrator can configure the phone using the Static URL method.
 To configure static provisioning information:
•
Use the table as reference.
Table 3-3: Static URL Automatic Provisioning Parameters
Parameter Description
provisioning/method Defines the provisioning method:

Disable - Automatic update is disabled. The phone attempts to
upgrade its firmware and configuration

Dynamic DHCP Options (Dynamic URL) (default) - Using DHCP
Option 160 and Options 66/67 for provisioning

Static URL - Using Static URL for provisioning
provisioning/firmware/url
The static URL for checking the firmware file. The URL must be
entered using one of the following syntax options:

<protocol>://<server IP address or host name>

<protocol>://<server IP address or host name>/<firmware file
name>
Where<protocol> can be one of the following protocols: ftp , tftp ,
http or https . For example:

tftp://192.168.2.1 – retrieved firmware file is440HD.img

ftp://192.168.2.1/Different_Firmware_Name.img - retrieved
firmware file is Different_Firmware_Name.img
Note: This parameter is applicable only when 'method' is
configured to Static .
provisioning/configuration/url Static URL for checking the configuration file, entered using syntax:

<protocol>://<server IP address or host name>

<protocol>://<server IP address or host name>/<configuration
file name>
Where<protocol> can be one of the following protocols: "ftp", "tftp",
"http" or "https". For example:

http://192.168.2.1 - configuration file name is <MAC
Address>.cfg, for example, 001122334455.cfg

https://192.168.2.1/440HD_<MAC>_conf.cfg - retrieved
configuration file name is 440HD_<MAC Address>_conf.cfg, for
example, 440HD_001122334455_conf.cfg
Note: Applicable only when 'method' is configured to Static .