400HD Series IP Phones
Administrator's Manual
220
Document #: LTRT-11973
Figure D-2: Verifying Recovery Mode in Wireshark
3.
Make sure that the source Ethernet MAC address is the same as that labeled on the
base of the phone. For example:
Figure D-3: Source Ethernet MAC Address in Wireshark Identical to Phone Base's
D.3 Recovering the Phone
The network administrator can recover the phone.
To recover the phone:
1.
Configure the PC NIC to which the phone is connected as follows:
•
IP address:
192.168.1.1
•
Subnet mask:
255.255.255.0
Summary of Contents for 405HD
Page 2: ......
