AudioCodes 320HD, Administrator'S Manual

Page: 54 / 116

320HD IP Phone
Administrator's Manual 54 Document #: LTRT-08108
3.13 Enabling Telnet Access
You can configure the phone through a telnet connection. The procedure below describes how to
enable telnet access to the phone.
¾
To enable telnet:
1. Access the ‘Telnet’ page ( Management tab > Remote Management menu > Telnet ).
Figure 3-28: Telnet Page
2. From the ‘Activate’ drop-down list, select "Enable".
3. Click Submit , and then OK at the confirmation box prompt.
Table 3-16: Telnet Parameters Description
Web Parameter Configuration File Parameter Description
Activate management/telnet/enabled Refer to Section 4.2.5