AudioCodes 320HD, Administrator'S Manual

Page: 39 / 116

Administrator's Manual 3. Web-based Management
Version 1.4.1 39 February 2011
3.6.4 Configuring Voice
The voice parameters are configured in the ‘Voice’ page, as described below.
¾
To define the voice parameters:
1. Access the ‘Voice’ page ( Configuration tab > Voice Over IP menu > Voice ).
Figure 3-14: Voice Page
2. Configure voice options according to the parameters in the table below, and then click
Submit .
Table 3-8: Voice Parameters Description
Web Parameter Configuration File Parameter Description
Gain Control
Enable Automatic Gain
Control voip/audio/gain/automatic_gain_contro
l/enabled
Refer to Section 4.2.6.2
Automatic Gain Control
Direction voip/audio/gain/automatic_gain_contro
l/direction
Target Energy voip/audio/gain/automatic_gain_contro
l/target_energy
Jitter Buffer
Minimum Delay voip/audio/jitter_buffer/min_delay Refer to Section 4.2.6.8
Optimization Factor voip/audio/jitter_buffer/optimization_fa
ctor
Silence Compression
Enable Silence Compression voip/audio/silence_compression/enabl
ed Refer to Section 4.2.6.8