AudioCodes 320HD, Administrator'S Manual

Page: 23 / 116

Administrator's Manual 3. Web-based Management
Version 1.4.1 23 February 2011
3 Web-based Management
This chapter describes the phone’s embedded Web server ( Web interface ).
Note: Where Web parameters can also be configured using the Configuration file, a
table is provided listing the corresponding Configuration file parameter. In such
cases, the description of the parameter (Web and Configuration file parameters)
appears only in the Chapter on Configuration file parameters (see Chapter
4 ).
3.1 Accessing Web Interface
You can use any standard Web browser (such as Microsoft Internet Explorer) to access the
phone’s Web interface. The IP address used for accessing the Web interface is the phone’s IP
address, received from a DHCP server or manually configured (static IP address).
¾
To access the phone’s Web interface:
1. Connect the LAN port of your phone to the IP network (using the Cable or ADSL modem
from your Internet Service Provider).
2. Determine the phone’s IP address obtained from the DHCP server, using the phone’s LCD
screen as described in Section
2.4 .
3. Start your Web browser, and then in the URL address field, enter the phone’s IP address, for
example, http://192.168.1.2 or https://192.168.1.2, as displayed below.
Figure 3-1: Phone’s URL in Web Browser
The Web login window appears:
Figure 3-2: Web Login Window
Note: The administrator’s default login user name and password are "admin" and
"1234" respectively. To change the login credentials, refer to Section 3.9 on
page 51 .