Contents of Carton
Amplified Subwoofer with Flame Grill
Installation & Operation Manual
Warranty Card
Power Cable with Fuse and Ring
Terminal
Ground Wire with Ring Terminal
Heat Shrink and Zip Ties
18 Gauge Remote Turn on Wire
Bass Knob with Cord
1 Fuse
High Level Input Harness
Sticker
Dog Tag
1. Make sure to carefully read and understand the instructions before
attempting to install your new Audiobahn tube.
2. Before making any electrical connection, make sure that you disconnect
the battery's ground cable to prevent the possibility of short circuit or damage
to your electronic equipment.
3. For easier assembly, we suggest you run all wires prior to mounting your
amplified tube.
4. Route all of the RCA cables close together, and away from any power
wires.
5. Use high quality connectors that can be found in the Audiobahn
Connections catalog. This will minimize signal and power loss.
6.Think before you drill! Be careful not to cut or drill into gas tank, fuel lines,
brake or hydraulic lines, vacuum lines, or electrical wiring when working on
any vehicle.
7. Avoid running wires over or through sharp edges. Use rubber or plastic
grommets to protect any wires routed through metal, especially the firewall.
8. ALWAYS protect the battery and electrical system from damage with proper
fusing.
9. When grounding to the chassis of the vehicle, scrape all paint from the
metal to ensure a good clean ground connection. Grounding connections
should be as short as possible, and always be connected to metal that is
welded to the main body or chassis of the vehicle.
Contents of Carton
4
