3/8" Wrench
or Socket
10-32 Nut
(6)
Washers
(6)
M5 x 20
(2)
M6 x 20
(2)
M8 x 20
(2)
1/4-20 x 3/8"
(1)
Multiwasher
(2)
8mm Hex Key
(1)
6mm Hex Key
(1)
5mm Hex Key
(1)
TV-Bracket
M3 x 8
(4x)
Wide
Bracket
(optional)
TVCB
Assembly and mounting Instructions
AUDIO
VIDEO FURNITURE INTERNATIONAL
288
Don Hillock Drive Aurora , Ontario L4G 0G9 www.video-furn.com
Toll Free: 1-877-834-3876 Fax: 1-905-751-1488 Local:905-751-1459
Note:
If you cannot understand these instructions or are concerned about safety of the installation
Contact a qualified contractor or contact AVF
I
at 1-877-834-3876.
Confirm all hardware is included before you begin assembly.
Not all hardware supplied will be used depending on the manufacturer of your display/s.
Thank you for purchasing AVF
I
's TVCB camera mounting system.
This product was designed for tabletop and wall mounting of a
video conferencing camera to 32- 60" TV's.
Supplied Parts:
Supplied Hardware:
Tools required:
Page 1
of 2
Hardware
Bag:
TVCB
Rev 2
Step 1
Use the set of provided bolts
(M5, M6, M8) that matches
your TV's mounting holes
to install the TVCB_1.
Attaching to Desktop TV
Step 2
Use the included 10-32 nuts
to assemble the camera plate/s and
neck.
Use the provided 1/4-20 or
M3 bolts to secure the video
conferencing camera.
(Method will vary
depending on camera)
Philips
Screwdriver
Camera
plate
Camera
Neck
Wide Camera
plate
