Page 1: ...AMilDilril ft l ill c o vl lvl tJ N I c AT I o N s PrY LrD l l f ii f tl t it 3 hdtn ffirlEd i iiiQ6lpq1y aFcl t n grctsa i iffii Aud io Telex C omfl5n S fjons Pty Ltd ...
Page 2: ...ier and is integral to the inbuilt prdectior included in the amplifier Dring ncmal qleratim the LED will flicker oocasiurally however if the LED flickas fm lemglhy p rids m stays cmtinuorsly glolying this is an indicatiqr that the amplifier is being overdriven by the incming program sipal If this input ovenload cmditim is cmbined with the maximum load m the output of the amplifier then the amplifi...
Page 3: ...s is by tuming the cap half a turn conrter clockwise with a screwdriver The value of the fuses is 8 Amps slow blow I Ptcasc ensurc thrt the AC power switch is in thc of lnition and thrt thc mtins power cord b disconnected beforc attemping to check or rephce this frsc Signal lnpUt SOCketS Signal input to the AT250B is via a 3 pin LR sockc and is rated at lOK Ohms and is active baland The two socket...
