manualshive.com logo in svg

Audio Technica ATUC-50, Instruction Manual, Page: 21 / 84

Share
Download
Audio Technica ATUC-50 Instruction Manual Download Page 21

21

ATLK-EXT165

①

⑥

⑦

⑧

②

③

④

⑤

①

 Mode switch

Remote mode

This mode allows the CU to automatically start 
the unit.

Standalone mode

This mode allows you to operate the EXT by 
itself.

We recommend using the remote mode if you are using the EXT.
Use the following procedure to turn the EXT’s mode switch on and off manually in standalone mode. If you change the order of operations, 
the 50DU that is connected may not be recognized correctly.
• To turn on the power 

Turn on 50CU power → Turn on mode switch of EXT

• To turn off the power 

Turn off mode switch of EXT → Turn off CU power

②

 Power indicator

③

 Audio Technica LINK Device indicator

Indicates the connection status of devices that support Audio Technica LINK.
• Connected: Lit
• Unconnected: Unlit

④

 Data indicator

• Establishing link (data not transmitted): Lit
• Transmitting data: Blinking
• No link: Unlit

⑤

 Cooling fan

⑥

 Audio Technica LINK POWER STATUS output terminal

Open: Power inactive
Close: Power active

⑦

 Audio-Technica LINK A/B terminals

• RJ-45
• Use to connect the devices that support Audio-Technica LINK.

⑧

 AC inlet (AC IN)

Connect the supplied AC power cord.

Summary of Contents for ATUC-50





















































































Reviews:

No comments