Audio Technica ATND1061DAN, User Manual

Page: 61 / 88

Web Remote
60
Audio (Install Settings)
Beam CHs
Configure audio settings for CH1 to CH6.
Item Description
Input Gain Set the input gain of the audio input.
Low Cut
Set whether to cut the low-pass range of the input audio.
Setting to “ON” (blue) will cut the low-pass range of the input audio.
4Band EQ
Set whether to apply 4-band EQ to the audio input.
Setting to “ON” (blue) will apply this function.
Level Set the level of audio input.
Mute
Set whether to mute or unmute.
Setting to “ON” (blue) will mute audio.
Gain Share
Set whether to enable auto mix.
Setting to “ON” (blue) will enable this function.
Analog Input
Item Description
Input Type Set the input type of the analog input channel.
Phantom
[1]
Set whether to enable phantom power. Setting to “ON” (blue) will enable
this function.
4Band EQ
Set whether to apply 4-band EQ to the audio input. Setting to “ON” (blue)
will apply this function.
Level Set the level of audio input.
[1] This is possible when “Input Type” is set to “Mic”.