Audio Technica ATND1061DAN, User Manual

Page: 52 / 88

51
Dante Controller
ATND1061DAN is compatible with Dante network audio.
I/O settings for Dante devices can be set using Dante Controller (application provided by Audinate). For information on
Dante Controller, visit the Audinate website (www.audinate.com).
Dante channel list
Input (Dante Transmitter)
Name displayed on Dante
Controller
Description
CH1 Coverage Zone audio output
CH2 Priority Zone audio output #1
CH3 Priority Zone audio output #2
CH4 Priority Zone audio output #3
CH5 Priority Zone audio output #4
CH6/AutoMix Priority Zone audio output #5 or auto mix signal output (selection possible)
AEC Ref Out Outputs AEC reference signals used with auto mix.
Sum Out
Used for auto mix when connecting multiple units. Outputs control signals
to the next microphone.
Output (Dante Receiver)
Name displayed on Dante
Controller
Description
AEC Ref In Inputs digital audio signals used as AEC reference signals.
Sum In
Used for auto mix when connecting multiple units. Inputs signals from the
main (Primary) microphone.
Chain In
Used for auto mix when connecting multiple units. Inputs control signals
from the previous microphone in the chain.
Mix In
Used for auto mix when connecting multiple units. Used by the main
(Primary) microphone to input auto mix signals to other (Follower)
microphones.