Audio Technica ATND1061DAN, User Manual

Page: 49 / 88

48
Reset button
Insert the tip of a pin or other thin device and press the reset button to reset the microphone.
Resetting can be performed only during normal operating mode.
Pressing the reset button while in power save mode will return to normal operating mode.
2
1
1 Indicator lamp
2
Reset button
Checking the network mode
1
Press the reset button.
Indicator lamp IP Config Mode setting
Flashes in green Auto
Flashes in orange Static
Network reset
The following network settings will be reset.
IP Control & Web Remote Port Settings
Allow Discovery
IP Control Settings
1
Press and hold the reset button for approximately 3 seconds.
The indicator lamp will switch between being lit in red and orange.
2
Press the reset button while the indicator lamp is switching between being lit in red and orange.
If there is no operation within 5 seconds of the indicator lamp switching between being lit in red and orange,
the microphone will return to normal operating mode.
The network reset will commence.