Audio Technica ATND1061DAN, User Manual

Page: 11 / 88

10
Part names and functions
Microphone
ATND1061DAN
1 4
10
12
11
6
7
8
9
4 3 2 5 6
1 Reset button
Insert the tip of a pin or other thin device and press this button to reset the microphone.
2
Indicator lamp
3
IR receiver
4
Release button
5
Hole for zip tie
6
Screw holes for VESA mount
Used when installing with a VESA mount.
7 Network A/B ports
Dante network ports. Used for connecting the LAN cable (CAT5e or higher). (Make sure to use conductor with a
diameter of 24AWG or larger and a shield.) Connect to the local area network and perform external control using the
application.
The power supply turns on when the network A port is connected to a PoE switching hub.
8 Analog output port
Used to connect the balanced cable.
+: Hot
−: Cold
G: Ground
9 Analog input port
Used to connect the balanced cable.
+: Hot
−: Cold
G: Ground