18
Troubleshooting
SBC priority connection (for when sound is significantly delayed)
Significant sound delays may be mitigated by changing the connection codec from AAC to SBC, which is normally
included in Bluetooth devices.
*1
Connecting
The procedure is performed while the product and Bluetooth device are paired.
1. Turn on the product.
2. With the music paused, long touch (10 seconds) the upper and bottom parts
of the touch panel as shown in the figure.
• The multi-indicator lamp will light in pink once, and then the product
will turn off. It will turn on again and be automatically connected to the
Bluetooth device.
*2
• When settings are complete, only the SBC connection codec will be
available. Other codecs will not be connected.
• For information about the multi-indicator lamp display, refer to “Multi-
indicator lamp display” (p.15).
*3
*1 Depending on your usage environment, sound delays may not be mitigated even if you
change to SBC priority connection.
*2 If the product is not connected automatically, refer to “Pairing a Bluetooth device”
(p.7), and pair again.
*3 When you turn off the product and turn it on again, the connection returns to normal and
connection with other codecs is enabled. Perform the SBC priority connection procedure
whenever needed.
