38
IP Settings
Set how to obtain IP addresses, and specify each value.
1. From “IP Config Mode”, select “Auto” or “Static”.
Auto
IP addresses are automatically assigned from the DHCP
server, etc.
Static
Specify static IP addresses.
Selecting “Static” enables the “IP Address”, “Subnet Mask”,
and “Gateway Address” fields. Enter the addresses you
want to specify.
The default value is "192.168.33.102".
2. Click “Apply”.
• The setting is now complete.
Allow Discovery
Set the product to be discovered automatically by "Locate".
1. Click the switch.
• The setting is turned ON (blue)/OFF (no color) each time the switch is
clicked.
• When the function is turned on, the product can be identified by "Locate".
2. Click “Apply”.
• The setting is now complete.
IP Control Settings
Set the options relating to IP control.
1. Set each item.
Port Number
The port number of the IP control is displayed.
Notification
Receive notifications from IP-controlled
devices.
Audio Level
Notification*
Receive audio level notifications from
IP-controlled devices.
Multicast Address*
Set the address for multicast.
Multicast Port
Number*
Set the port number for multicast.
* This item can be set only when “Notification” is turned ON (blue).
2. Click “Apply”.
• The setting is now complete.
NTP Setting
Set the NTP (Network Time Protocol).
1. Set each item.
Enabled
Set whether to enable or disable the NTP
(Network Time Protocol).
Server Address
Set the NTP server address.
Port Number
Set the NTP port number.
Time Zone
Set the time difference from the UTC
(Coordinated Universal Time).
Daylight Saving Time
Turn on/off the daylight saving time.
Start Date & Time
Set the starting date/time of daylight saving
time.
End Date & Time
Set the ending date/time of daylight saving
time.
2. Click “Apply”.
• The setting is now complete.
Setting the system details (Settings & Maintenance)
Network in System Settings
