35
Setting the audio output details
Adjusting the output level
Set the Mic/Line output level for each channel.
1. Click the volume adjustment dial, and move it up and down to
adjust the output level.
Turning the max volume ON/OFF
Determine the Max Volume and turn it ON/OFF for each channel.
1. Click “Max Volume”.
• The function is turned ON (blue)/OFF (no color) each time the dial is clicked.
• The fader maximum is set at the position when the Max Volume is turned
ON. The range above the specified position is grayed out. To change the
position, turn the Max Volume OFF and then back ON.
Setting the USB output
Select the USB output bus and set the transmission level.
1. Click “USB OUT”.
2. Select the bus for USB output.
• You can select up to two sources from “1”, “2”, and “AEC”.
• If "ST” is selected, other sources cannot be selected.
3. Select the level for USB output.
• Click
/
to adjust the level. You can also click the number and enter
another value directly.
Max Volume ON/OFF
Volume adjustment dial
Max Volume setting position
