Audio Technica ATDM-0604 User Manual Download Page 15

Page: 15 / 80

Using the product

Starting the product

1. Press the power button.

• The PRESET LED lights, blinks, and LEVEL·GAIN LED turns on. Then, the

PRESET LED turns off, and the product starts in operator mode.

Front panel mode

The following two modes are available for operating the product by
using the buttons and the dial on the front panel.

Operator mode:

In this mode, daily operations are performed, such as loading the preset
settings and adjusting the audio level.

Advanced mode:

In this mode, advanced settings can be configured by installing and
implementing the product on site.

• When the power is turned on, the product usually starts in

operator mode. This prevents accidental device setting changes
or other troubles, and ensures safe operation of the system.

Changing the front panel mode

(operator mode/advanced mode)

Change between operator mode and advanced mode.

1. While pressing the MODE button, press and hold the dial button

(for 1 or more seconds).

2. LEDs light/blink/turn off, and the front panel mode changes.

• When changing to operator mode

(1) The LEVEL·GAIN LED and the PRESET LED light.
(2) The PRESET LED turns off.
(3) The front panel mode changes to operator mode.

• When changing to advanced mode

(1) The LEVEL·GAIN LED, the PRESET LED, and the LEDs from SIG/

PK·MIC/LINE to SIG/PK·PRESET SAVE become lit.

(2) All LEDs turn off except the LEVEL·GAIN LED, which blinks.
(3) The front panel mode changes to advanced mode.

Selecting a function

Press the MODE button, or turn the dial button while pressing the
MODE button, to select the function.

• Determine the function selected based on the LED that lights (LEVEL·GAIN

LED and PRESET LED, or an LED from SIG/PK·MIC/LINE to SIG/PK·PRESET
SAVE).

Functions available in operator mode

Functions available in advanced mode

Press the MODE button to change the function in the clockwise
direction as shown in the figure. While pressing the MODE button, turn
the dial button to change the function to the one in the direction of the
dial.

LEVEL

PRESET

Start of function

selection

GAIN

PRESET

PRESET SAVE

AEC

ASSIGN

SMART MIX

PRIORITY

LOW CUT

PHANTOM

MIC/LINE

LEVEL

Start of function

selection

Summary of Contents for ATDM-0604

















































































Search results

Summary of Contents for ATDM-0604

Reviews:

Related manuals for ATDM-0604

Brands by name

Popular brands

Audio Technica ATDM-0604, User Manual

Search results

Summary of Contents for ATDM-0604

Reviews:

Related manuals for ATDM-0604

Brands by name

Popular brands