10
Care
Turntable body
•
When the turntable body is dirty or dusty, first disconnect the
AC adapter, and then wipe off the dirt and dust with a soft,
dry cloth.
•
Do not use benzenes, thinners, etc.
•
When storing the product for a long time, disconnect the AC
adapter from the outlet and wrap the product in plastic; do
not allow it to become damp.
Stylus tip
•
If dirt and grime are stuck to the stylus tip, clean it with a
commercially sold brush.
•
We recommend using a stylus cleaner (sold separately) if the
stylus tip is considerably dirty. Clean the stylus tip by moving
the brush from the rear to the front of the stylus tip.
Replacing the stylus
Removing the stylus
•
In addition to the deterioration of sound quality, records may
also be damaged as the cartridge’s stylus tip wears down.
•
As a rule of thumb, replace the stylus after 400 hours of use.
•
Be sure to disconnect the product’s AC adapter from the
outlet.
•
When replacing the stylus, hold the headshell and the
cartridge body tightly.
1. Rotate the front of the stylus in a forward and down
motion.
Installing a new replacement stylus
1. Mount the new replacement stylus to the cartridge.
2. Lift the stylus up until you hear a click.
3. Make sure there is no gap between the headshell and the
cartridge.
Engage in body first
