6
Preparation for use
Connecting via Bluetooth wireless technology
The product supports Bluetooth wireless connection. It can
be connected with Bluetooth-compatible headphones, active
speakers and wireless stereo speakers (hereinafter referred to
as Bluetooth receiver devices).
About pairing
When connecting a new Bluetooth receiver device, you need to
pair it with the product. Once the Bluetooth receiver device and
the product are paired, you do not need to pair them again.
However, in the following cases you will need to pair again
even if the Bluetooth receiver device was paired once:
•
If the product is deleted from the Bluetooth receiver device’s
connection history.
•
If the product is sent out for repair.
•
If 9 or more devices are paired.
(The product can save the pairing information of up to 8
devices. When you pair with a new device after pairing with
8 devices, pairing information for the device with the oldest
connection date will be overwritten by the information for the
new device.)
Pairing a Bluetooth device
•
Read the user manual for the Bluetooth receiver device.
•
Place the device within 1 m (3.3') of the product to perform
pairing correctly.
1. Set your Bluetooth headphones, speakers, etc. to pairing
mode.
2. Make sure the AC adapter is connected to an outlet, and
then press and hold the wireless function button (about 2
seconds).
•
The indicator LED will flash in red and blue alternately.
3. When pairing is complete, the indicator LED lights in blue.
•
The product stays in the pairing mode for 30 seconds. If pairing
is not properly completed, follow the above steps again from the
beginning.
About indicator LED display
The indicator LED indicates the product's status as explained
below.
Status
Indicator LED display pattern
Red
Blue
Pairing
Searching for
device
Flashing
Connection
Waiting to be
connected
Connecting
Lit
Disconnecting
O N
O N
2 SEC
Blue
Red
Blue
