Audio Service Mood Li-Ion G6, User Manual, Page: 9 / 19

16 17
Removing a hearing instrument:
X
Lift the hearing instrument and
slide it over the top of your
ear
➊
.
X
If your hearing instrument is
equipped with a custom shell
or a CLIC MOULD, remove it
by pulling the small removal
cord toward the back of your
head.
૜
૝
X
For all other ear pieces: Grip the receiver in the
ear canal with two fingers and pull it carefully out
➋
.
Do not pull the receiver cable.
CAUTION
Risk of injury!
X
In very rare cases the ear piece could remain in
your ear when removing the hearing instrument.
If this happens, have the ear piece removed by
a medical professional.
Clean and dry your hearing instruments after usage.
Read more in section "Maintenance and care".
Adjusting the volume
Your hearing instruments automatically adjust the volume
to the listening situation.
X
If you prefer manual volume adjustment, press the
upper part of the rocker switch to increase the volume
or press the lower part to decrease the volume.
Refer to section "Controls" for the setting of your
rocker switch.
An optional signal can indicate the volume change. Once
the maximum or minimum volume has been reached, you
may hear an optional signal tone.
Changing the hearing program
Depending on the listening situation, your hearing
instruments automatically adjust their sound.
Your hearing instruments may also have several hearing
programs which allow you to change the sound, if
needed. An optional signal tone can indicate the program
change.
X
To change the hearing program, press the rocker
switch briefly.
Refer to section "Controls" for the setting of the rocker
switch. Refer to section "Hearing programs" for a list of
your hearing programs.
The default volume is applied.